ECO-6599 · REV D · effective November 16, 2026
EV Manufacturing TransitionRELEASEDEngineering notice
Visteon, Shinry and Infineon build single-stage 22 kW onboard charger
Visteon, Shinry and Infineon are validating a single-stage 22 kW onboard charger using Infineon's bidirectional GaN switches, with no production date or customer yet named.
Scope of change
- The charger supports three-phase AC charging at up to 22 kW and single-phase charging at up to 19.2 kW.
- Visteon, Shinry and Infineon announced the collaboration at the electronica trade fair in Munich.
- Development is in the validation phase, with no production date or carmaker customer disclosed.
- Infineon's monolithic bidirectional GaN switches cut semiconductor component count and enable V2X power flow.
- The parallel EU HiPower 5.0 project targets shrinking a 22 kW charger from about 12 litres to four litres.

Visteon, Shinry and Infineon are developing an onboard charger rated at up to 22 kW in a single power-conversion stage, the three companies announced at the electronica trade fair in Munich. Development is still in the validation phase, and no production date or vehicle customer has been named.
Who is building what?
The charger comes from Visteon-Shinry Power Electronics LLC (VSPE), a joint venture that pairs Visteon's automotive electronics business with Shinry's experience in onboard chargers and DC/DC converters. Infineon supplies the semiconductor side: monolithic bidirectional gallium nitride (GaN) switches, devices that block voltage in both directions and conduct current in both directions on a single chip.
The architecture matters as much as the parts. Conventional onboard chargers convert grid power in several stages, and two-stage designs require large DC-link capacitors (components that buffer energy between conversion stages). VSPE's single-stage topology folds several conversion functions into one stage, eliminating those capacitors. According to the partners, this cuts the system's size, complexity and cost while improving reliability.
What does the charger actually deliver?
The specification sheet lists three capabilities:
- Three-phase AC charging at up to 22 kW
- Single-phase AC charging at up to 19.2 kW
- Bidirectional power flow for vehicle-to-everything (V2X) applications
Bidirectional operation means the vehicle can feed energy back to the grid, not just draw it. Depending on vehicle and infrastructure integration, the partners point to vehicle-to-grid (V2G) and vehicle-to-home (V2H) use cases — an area where European grid codes and tariff structures, not hardware, currently set the pace of adoption.
Why bidirectional GaN switches?
Infineon's switches carry the design. Because each device can block and conduct in both directions, engineers can implement bidirectional switching functions with fewer semiconductor components than conventional arrangements, which pair a switch with a separate blocking element. Gallium nitride also switches at high frequency, which allows smaller magnetic components such as transformers and inductors, raising power density and shrinking the complete system.
Infineon is pursuing the same approach elsewhere. In the EU HiPower 5.0 project, a consortium led by Fraunhofer IZM is developing a compact 22 kW onboard charger that uses monolithically integrated bidirectional GaN switches to shrink the typical charger volume from roughly 12 litres to four litres. That target offers a useful yardstick for what the VSPE design might achieve, although the partners have not published a comparable volume figure for their own unit.
What to watch next
Two questions will decide whether this announcement becomes a production program. First, the validation outcome: single-stage topologies place demanding stress on power semiconductors, and passing automotive qualification is the gate every such design must clear. Second, the customer: the companies have not disclosed which carmaker might adopt the charger or when it could reach series production. A production nomination from a major OEM, or a disclosed volume target, would mark the shift from a technology demonstrator to a confirmed program.
via electrive (Source)
More from Sophie Lindqvist
Show full bio
Correspondent covering money, funding and market shifts around Automotive manufacturing and vehicle production at Autoplant Brief.
319 articles
Also circulated
- Infineon and Visteon-Shinry build 22 kW single-stage GaN onboard charger
- Infineon and VSPE build 22kW single-stage EV onboard charger on GaN switches
- Infineon to Pour €1.1 Billion into Villach GaN Chip Plant by 2034
- NOVOSENSE, UAES and Innoscience join on EV power electronics
- Chery targets more than 20,000 Volt-Dragon stations by 2029