ECO-4847 · REV F · effective November 16, 2026

Industry Analysis & MarketsRELEASEDEngineering notice

Record El Niño Forces Manufacturers to Rethink Weather Risk

The strongest El Niño on record peaks around December, with four-degree ocean anomalies. Experts say flood-zone maps, historical models and single-corridor supply chains won't hold.

Scope of change

  1. Ocean-surface temperature anomalies near four degrees are driving the strongest El Niño on record, peaking around December.
  2. Hurricane Harvey caused about $125 billion in damage in 2017; Thailand's 2011 floods cost tens of billions and hit global car and hard drive output.
  3. Newer microgrids can switch to island mode in as few as 20 milliseconds versus a 30-second average.
  4. Sonoco recommends safety stock covering a four- to six-week transportation delay.
  5. Gulf Coast faces above-average precipitation; Pacific Northwest faces drier-than-average conditions.
How to prepare for the most severe El Niño on record
Fig. 01How to prepare for the most severe El Niño on record — PublicDomainPictures / pixabay

Ocean-surface temperature anomalies of around four degrees are driving what experts call the strongest El Niño ever recorded, and its global impacts are expected to peak around December — squarely inside U.S. manufacturers' production and shipping windows.

The event, caused by warming water in the central and eastern tropical Pacific, will split U.S. manufacturing hubs into divergent weather regimes: above-average precipitation along the Gulf Coast, drier-than-average conditions in the Pacific Northwest. No region gets a pass.

"As somebody who's worked in sustainability and this space for the entirety of my career, we've never seen temperatures around four degrees at the surface," said Josephine Tucker, Americas Head of Energy Advisory and Sustainability.

Why historical flood data no longer works

No two El Niños behave alike, and that breaks the standard risk playbook. Models built on historical records miss what's now routine.

"What we're seeing is things that never happened are [now] happening all the time," said Firas Saleh, director of North American flood models at Moody's.

He pointed to two case studies. Thailand's 2011 flooding caused tens of billions of dollars in damage and crippled hard drive and car manufacturers worldwide. Hurricane Harvey in 2017 caused some $125 billion in damage across Texas and Louisiana — the costliest tropical cyclone on record. Both hit regions classified as low risk at the time.

"Exposure is constantly evolving," Saleh said. "There are many regions that had impacts of storms, hail, wildfire, but there were no claims reported because it was just empty land." Land that has since been built on.

Both experts said businesses should assess vulnerabilities site by site rather than lean on flood-zone maps, using free GIS software or enterprise tools to establish a baseline. Risk factors include the obvious — equipment on site, salt water versus fresh water, water speed, mudslides and debris — plus hidden ones like heavy rain hitting wildfire-scarred ground, which amplifies runoff and slide risk.

What should plants do now?

The capital-intensive upgrades — onsite power, site infrastructure changes — needed to start months ago. That window has closed for many. What's left is fast, concrete.

"Do a water and power audit [and] understand where your risks of failures are," Tucker said. "If you have many sites, rank them by risk of exposure. Then on a site level, test your backup systems, understand what your fuel supply is like — and actually do that under load constraint."

Testing under a realistic production scenario exposes failure points quickly. The most common blind spot, she said, is "typically related to stormwater drainage." Inland plants often lack robust stormwater systems even though coastal facilities face the more obvious hurricane threat.

Tucker framed the investment question bluntly: "If you were to lose power for two hours or two days, what would that do to your business?" Resiliency spending is now essential, not a nice-to-have.

Supply chains need optionality

Brian Harold, managing director at APM Terminals, said supply chain resilience is "increasingly tied to connectivity and network optionality" — reliable port infrastructure, efficient inland connections and multiple cargo pathways.

A Sonoco industry report recommends a standing demand-planning conversation with key suppliers plus safety stock sized to absorb a four- to six-week transportation delay. But inventory alone isn't the answer, said John Pontrello, VP of Consumer Packaging North America. Companies should map where inventory protects most, where the supply chain is concentrated, and where an alternate domestic production or logistics path exists — before it's needed.

Sonoco's domestic metal-can base cuts dependence on ocean freight and single corridors like the Panama Canal. "That doesn't eliminate weather risk, but it can reduce the number of variables between the source of supply and the customer's operation," Pontrello said via email.

Saleh flagged contingent business interruption insurance, which pays out when a supplier — not the manufacturer — fails to deliver.

The microgrid math

Newer microgrids (small-scale grids powered by a local source) can switch to "island mode" in as few as 20 milliseconds, versus an average of 30 seconds.

"The difference between 20 milliseconds and 20 actual seconds is not resetting a clean room, or not resetting a robotics line," Tucker said — a meaningful financial distinction for advanced manufacturing.

For capital-constrained companies, "-as-a-service" models turn capex into opex with no upfront cost. "You pay a set price every month," Tucker said.

"The strongest supply chain isn't the one that predicts every disruption," said Ernest Haynes, Sonoco's president of global consumer packaging. "It's the one with options when disruption arrives."

Watch for the December peak, and whether facility audits and microgrid deployments accelerate before it lands.

via Manufacturing Dive (Source)

Filed under

  • el-nino
  • manufacturing-resilience
  • climate-risk
  • supply-chain-resilience
  • microgrids
Share this article:

More from Grace Kim

Grace Kim

Show full bio

Staff writer covering people, launches and day-to-day practice in Automotive manufacturing and vehicle production at Autoplant Brief.

293 articles

Also circulated

« Previous articleNext article »