ECO-8723 · REV X · effective November 16, 2026
Vehicle Plants & ProductionRELEASEDEngineering notice
ZF Foxconn starts building dedicated Bentley axle plant in Stoke
ZF Foxconn Chassis Modules has begun constructing a dedicated axle plant in Stoke-on-Trent that will supply complete front and rear axle systems exclusively to Bentley from 2027.
Scope of change
- ZF Foxconn Chassis Modules is building a dedicated axle plant at Chatterley Park, Stoke-on-Trent, with production due in 2027.
- The site sits around 17 miles (27km) from Bentley's Crewe factory and will feed it on a just-in-sequence model.
- The plant will handle axles for combustion, hybrid and electric models under Bentley's Beyond100+ strategy.
- Neither Bentley nor ZFFCN has disclosed the investment size or the number of jobs the plant will create.
- Tighter UK-EU rules of origin for electrified vehicles take effect in 2027, the same year production starts.

Production of complete Bentley axle systems starts in 2027 at a new ZF Foxconn Chassis Modules plant in Stoke-on-Trent. That date is the hardest number in an announcement that leaves two others blank: neither company has disclosed the investment size nor the number of jobs the site will create.
ZF Foxconn Chassis Modules (ZFFCN), the joint venture between the German supplier and the Taiwanese electronics group, has started construction at Chatterley Park, roughly 17 miles (27km) from Bentley's Crewe factory. The facility will assemble complete front and rear axle systems exclusively for Bentley. It marks the first concrete piece of the luxury automaker's plan to pull key suppliers closer to home.
How will the plant operate?
The site will run on a just-in-sequence model. Finished suspension modules will go straight onto Bentley's production lines with no warehousing in between. The plant is designed to handle axles for combustion, hybrid and electric models alike, giving Bentley flexibility as its powertrain mix shifts under the Beyond100+ strategy.
Bentley frames the project as bigger than one building. The company describes the plant as the first cornerstone of a future supplier park near Crewe.
"As part of our UK localisation strategy, this investment demonstrates our commitment to strengthening the domestic supply base and supporting the long-term competitiveness of British automotive manufacturing," said Andreas Lehe, Member of the Board for Manufacturing at Bentley Motors.
The supplier side sounds equally committed, though equally light on specifics.
"We are honoured to be Bentley Motors' preferred chassis partner. Our recent investment demonstrates our strong commitment to the UK and our confidence in the future of automotive manufacturing in one of the world's most renowned luxury automotive markets," said Ben Roos, Chief Executive of ZFFCN.
What is not being said?
No investment figure. No headcount. No capacity target. No timeline beyond the 2027 start of production. A supplier park around Crewe is described as a plan, not a built reality — only the axle plant has broken ground. Until the JV publishes volumes, the strategic claims rest on one confirmed construction site.
The stakes are nonetheless real. A supplier park would give Bentley tighter control over quality and logistics as it brings its next generation of vehicles into production.
Why does localisation matter now?
Three pressures shape this project:
- Shared-line complexity. Low-volume luxury automakers see just-in-sequence localisation as a way to manage combustion, hybrid and electric variants built on the same lines.
- Rules of origin. UK-sourced complete axle systems could help Bentley's future electric models meet tighter UK-EU rules of origin for electrified vehicles due from 2027 — the same year the plant starts building. Imported content becomes a growing tariff risk under those rules.
- Foxconn's chassis reach. A dedicated plant for a European luxury automaker shows the ZF-Foxconn venture building a customer base beyond Foxconn's own EV ambitions, extending the electronics group's footprint in conventional chassis supply.
The 2027 timing cuts both ways. It aligns the plant with the new rules of origin and Bentley's electrification push, but any slip in construction or ramp-up would land squarely inside that regulatory window.
What to watch next
Watch for a construction completion date, a disclosed headcount, and confirmation of which Bentley models the Stoke axles will serve first. The second cornerstone of the Crewe supplier park — whoever it is — will tell us whether Bentley's localisation strategy is a programme or a single contract.
via Automotive World (Source)
More from Amara Osei
Show full bio
Market editor covering technology and product news in Automotive manufacturing and vehicle production at Autoplant Brief.
326 articles
Also circulated
- Bentley Commits £350m to British EV Manufacturing Push
- Nexteer opens 40,000 sq m Liuzhou steering plant after 12 million units
- GAC Begins European Vehicle Production Through Magna Partnership
- Thyssenkrupp and Inovance sign steer-by-wire MoU, China first
- Toyota’s $34 million Scion revival targets a US utility niche